Resistive voltage divider

Calculates properties of resistive voltage divider circuit

Example 1: Must calculate the input voltage when output voltage is 500 millivolts using 120 kilo-ohm source and 10 kilo-ohm sink resistorsView example
Example 2: Must calculate the source resistor to have 1 volt output at 100 volt input using 2.2 kilo-ohm sink resistorView example
Input voltagevolts
Output voltagevolts
Source resistor (R1)ohms
Sink resistor (R2)ohms
You may use one of the following SI prefix after a value: p=pico, n=nano, u=micro, m=milli, k=kilo, M=mega, G=giga

Source resistor (R1)217.8 kilo-ohms
Voltage drop of source resistor (R1)99 volts
Power of source resistor (R1)45 milliwatts
Power of sink resistor (R2)~454.545455 microwatts
Total power of the circuit~45.454545 milliwatts
Total current of the circuit~454.545455 microamperes